- New
METAL and FIRE under CONTROL
C-Type Hose, Refill Pipe, and Fixed Coupling Valve
lei375.00
Tax included
Return policy: 14
The Type C fire hose, together with the discharge nozzle (branchpipe) and hydrant valve with a fixed C‑type Storz coupling, forms a complete set supplied with hydrant cabinets and fire points, and is essential firefighting equipment.
Limitation of Liability: The product information corresponds to the time of writing and is provided for informational purpos
Delivery policy: Important no. phone! We will contact you for confirmation. Fast courier at 17 RON under 15 kg.
Returns policy: Customers have the right to return products within 14 days of receiving them.
Components:
- Type C hose reel: rotating drum made from DC01 pickled, cold‑rolled sheet steel, 0.7 mm thick, for winding the hose.
- Type C layflat hose, DN 52, length 20 m, white, with C‑type couplings; manufactured in accordance with EN 14540:2007.
- DN 52, PN16 indoor hydrant valve with fixed coupling, compliant with ISO 5208 testing requirements.
- Fixed coupling type C52.
DN52 discharge hose is a rubber‑lined, textile layflat hose whose section becomes circular only under internal pressure; when unpressurised it can be folded and stored flat. It is intended for water delivery for firefighting.
Technical characteristics:
- Internal diameter, length, and mass per unit length in accordance with SR EN 671‑2.
- Internal diameter for type C hose: 52 mm (tolerance +1.0 / −0.5 mm).
- Length: 20 m (tolerances as per SR EN 671‑2).
Fixed coupling type C is part of the water‑delivery accessories and is installed indoors on the fire water distribution network. Manufactured to STAS 701‑74.
Constructionally, it consists of a body, a gasket carrier, and a sealing gasket, to which the discharge hose can be connected in the event of a fire. The gasket carrier is swaged onto the coupling body so the parts form a single assembly. The nominal bore for the C‑type fixed coupling is 2 inches.
The minimum pressure resistance is 12 bar.
Hydrant valve for indoor hydrants is part of the water‑delivery accessories and is installed on the internal fire water distribution network. Manufactured to STAS 2501‑83.
It comprises a valve with handwheel and a fixed threaded C outlet, to which the discharge hose connects during firefighting operations.
The minimum pressure resistance is 12 bar.
The internal diameter of the pipe on which the hydrant valve is mounted is 2 inches. Hydrant valves are supplied fully equipped with the fixed coupling fitted.
Branch pipe/nozzle DN 52, 12 mm orifice, for solid jet and spray, Q = 2.5 l/s, with shut‑off valve.
Products comply with:
- Law 319/2006 — Occupational Safety and Health Act
- Law 265/2006 — Environmental Protection Act
Specific References
No customer reviews for the moment.
The Type C fire hose, together with the discharge nozzle (branchpipe) and hydrant valve with a fixed C‑type Storz coupling, forms a complete set supplied with hydrant cabinets and fire points, and is essential firefighting equipment.